JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive TransitionT high frequency waveguide.
75 in MDF (Medium Density Fiberboard) enclosure. SonicGuardT protects the high frequency driver from excess power without interrupting the performance. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10°.
Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (±3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Nominal Dispersion : 90º x 50º.Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in). Weight : 27.4 kg (60.5 lb).
High Frequency Driver : JBL 2414H-C, 1 exit compression driver mounted on Progressive TransitionT Wave guide. Low Frequency Driver : JBL M115-8A. Input Connectors : Parallel Neutrik® Speakon® NL-4 (x1). Mounting & Suspension : 36 mm, dual-angle pole-mount socket.The Rockville RPM870 is an 8 channel powered console mixer with USB input. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps.
These are some of the best sounding mic pre's on the market. They compete in quality with any brand on the market! The next goal we had was versatility.
We also built in a 24 bit digital effects processor that sounds great. We didn't include 99 effects which all sound the same.Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests. We tested this and we ran the mixer to (2) Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15 DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean.
The great thing about this is the amp does not overheat even when cranking it for hours straight. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings but RMS is the true continuous output power you should look at.
Other great features are a dual 7 band master EQ, a 4 band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks. But what is really cool is that you can record your main mix onto the USB! We also added bluetooth to this mixer to give you all the latest and greatest options.
On top of this, we are offering a. Just be sure to send it back including the original packaging. Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power. 8 Channel mixer section: 6 mono channels, 1 stereo channel. 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones.
XDR2 mic preamps are low-noise and low distortion. 1 dedicated USB input to play back music or record the main mix. USB supported formats are MP3, WAV, WMA. Built in bluetooth wireless audio streaming. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects).
Effects level control can adjust signal level of each effect. FX footswitch input lets you turn your effects on or off.
4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, must, and solo buttons with LED's. Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping.
Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). You can control your monitor mix and check levels through your headphones. Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping.
We recommend lowering the gain if you see these LED's lit up. Power and Output level LED indicators.
Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R.
Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position. When the pad button is pressed in the gain will adjust from 240dB to 0dB. Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down.You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want. Built in cooling fan and ventilation system. USB input supports unlimited capacity (as many GB as you want). Dimensions: (LWH) 15.16" x 17.72" x 7.09 inches / 38.5 x 45 x 18 cm. How to Set Up Your PA Speaker Stands. This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment. This package also comes with two 20 foot 1/4 Speakon NL-4 cables! Adjustable Height Range: 47.25-78.75 inches. Tube Diameter: 1.5 - 1.37 inch. Leg Diameter: 1.37 inche. Includes (2) 20 foot 1/4 to Speakon NL-4 speaker cables. Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want! About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control.
They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. Great features and great quality make Rockville a great choice. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a.To replace the item for a brand new one. All replacements and exchanges are free. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Speakers".
The seller is "audiosavings" and is located in this country: US. This item can be shipped to United States.